Your Trusted Plumber in Brampton, ON

If there’s sewage backing up in your basement, stop using water right away and call a plumber right away. A sewer backup often shows up at the lowest point in the home, and Peel Region lists warning signs like sewage at the basement drain, foul odours, and gurgling sounds from a floor drain. The fastest way to make a backup worse is to flush toilets or run sinks, because everything you send down comes back up. Keep people and pets away from the affected area and avoid contact with the water. If you have a safe way to shut off water to fixtures being used, do it and let a licensed plumber diagnose whether the restriction is in your lateral or the municipal line.

It depends on where the blockage or damage is located. Your home has a private sewer lateral running from your house to the municipal connection, and backups originate on either side. Peel Region offers an "Emergency help with a sewer backup" service and notes that if the backup is in a municipal-owned pipe, the service might be free, which is a clue that they distinguish municipal versus private responsibility. Our plumbers can use a camera to inspect your cleanout, locate the problem, and document the findings. This will show what the problem is and help you make the right calls, avoid duplicate work, and speed up any municipal involvement if the issue is not on your property.

A plumbing cleanout is an access point to your main sewer line that allows a plumber to clear a blockage or run a camera without removing a toilet. Peel Region describes it as a solid 4-inch cap, typically flush to the floor, often located near the front of the house in the basement. We suggested that you locate your cleanout before you need it and keep the area around it clear. In an emergency, saving ten minutes of digging behind storage shelves means less water on the floor and a faster diagnosis of whether the issue is a localized clog, a main line obstruction, or a structural problem in that pipe.

You don't control the weather, but you reduce your risk. Peel Region explains that sanitary sewers become overloaded during intense rainfall and also mentions that improper disposal of items like wipes, fats, oils, and grease contributes to blockages. A sanitary backwater valve helps prevent wastewater from flowing back into your home, and Peel Region offers a 60 percent rebate on the invoiced amount, up to $ 1,500, for eligible installations. Remember, a backwater valve only helps if it is installed correctly on the sanitary lateral and maintained. Before storm season, schedule an inspection to ensure the valve flap moves freely and seals properly.

If your backwater valve closes during a backup event, do not use your plumbing fixtures until the event is over. Peel Region specifically warns that when the valve is closed, water does not exit your home, and using toilets, sinks, showers, dishwashers, or washing machines can cause your basement to flood. Treat an activation as a "no water use" situation and check the valve afterward. If you have repeat activations, it is worth having a plumber inspect the valve to confirm it is the correct type and location, and to verify there is no recurring restriction in the building drain causing frequent surcharging.

Sometimes, yes. The City of Brampton explains that building permits confirm that work complies with the Ontario Building Code and lists plumbing-related categories, such as "Plumbing Fixtures/Finishing Roughed-in Plumbing" and "Municipal Water Service or Sanitary Sewer Services." Make sure to plan ahead before you renovate a bathroom, finish a basement, or add fixtures, because permit and inspection requirements affect scheduling. If you are installing a sanitary backwater valve, Peel Region also requires a building permit from the City of Brampton and an inspection approval to be eligible for the rebate, so it is important to get the paperwork lined up before the work begins.

It is either, and the fastest way to narrow it down is to check whether the issue is isolated to your home. Peel Region posts water outage information and notes that emergency repairs require shutting water off to a street or neighbourhood. If you’re having issues with a lack of water, ask a neighbour on your street if they have water and check whether your main shutoff valve near the water meter is fully open. If the whole street is out, it is likely a regional interruption; if only your home is affected, call a plumber to check for a failed valve, frozen service line, or plumbing issue inside your home.

This is actually a common problem reported after water is restored, and it does not mean your plumbing is failing. Tap water will be slightly discoloured after emergency water repairs, and Peel Region advises running your taps using cold water only until the water runs clear again. Try to avoid doing laundry until the water runs clear, because sediment, which causes the discolouration can also stain fabrics. If the discolouration does not improve after running cold water for a reasonable period, or if you repeatedly see particles clogging the faucet screens, call our plumber. We will check aerators, flush affected lines safely, and confirm that there isn't a separate issue, such as corrosion or a failing water heater, causing the colour.

Contact our customer service team to schedule an appointment with a knowledgeable plumber in Brampton.

The best way to reduce the risk of frozen pipes in your home is to protect vulnerable pipes before the coldest days arrive. Peel Region recommends keeping your home temperature at or above 15 degrees Celsius, sealing cold-air entry points near foundations and exterior walls, and protecting water meter piping with foam insulation or with approved heat tape or heat cables used as directed. You should focus on pipes in cold pockets, like near rim joists, crawl spaces, and garage-adjacent walls. If you plan to travel, follow Peel's guidance to shut off the main water valve, drain the pipes from the lowest level, and have someone check the home daily. Prevention costs much less than cleanup from a burst line.

Call a plumber, and avoid rushing the thaw. Peel Region advises locating the suspected frozen area, leaving a cold water tap downstream open so you know when flow returns, and applying heat with an electric heating pad or a hair dryer. Do not use an open flame or a torch, as they can damage pipes and create a fire risk inside walls or near insulation. Frozen pipes are also tricky because the break often shows up when the ice plug begins to melt and pressure returns. If you don't locate the freeze, or if you already see damp drywall, shut off the main water valve and get a licensed plumber onsite.

We look at the symptoms and test methodically. If one fixture is slow, it is often a localized clog in the branch line. If multiple fixtures are slow, you hear gurgling, or water backs up at the lowest drain that points toward the main line. Peel Region lists gurgling sounds and sewage at the lowest point as signs of sewer-related problems, and those signals matter. We do not recommend using chemical drain cleaners to clear a clog, especially if the clog keeps coming back. Recurring issues with clogs often require mechanical cleaning or a camera inspection to confirm whether the problem is buildup, roots, a pipe belly, or a damaged section, which will require a professional's attention to resolve.

We start by listening to what you are seeing, then we isolate whether the issue is on the pressurized supply side or the drainage side, and we test to confirm the cause. If it is a drain or sewer concern, a camera inspection can show what is happening inside the pipe, so we recommend the right fix. Make sure to share the timeline of symptoms with us, such as when it started and whether it worsens during rain, because this information helps us separate a private clog from a surcharging sewer situation. With Mr. Rooter Plumbing, you also get upfront, flat-rate pricing before work begins, so you can choose the option that best fits your home.

Start by confirming whether you have continuous water use when everything is off, then bring in a plumber to locate the leak. The EPA WaterSense program states that fixing easily corrected household water leaks saves homeowners about 10 percent on their water bills, with the bigger savings often coming from running toilets and hidden pipe leaks. Check your toilets first, because they leak silently into the bowl. If you are not sure, we pressure test, inspect shut-off valves, and pinpoint leaks with minimal disruption. Fixing leaks also reduces the risk of mold and water damage, which is usually the more expensive part of the problem.

Low water pressure comes from several sources. Mineral buildup inside pipes is common in Brampton because of moderately hard water. A partially closed shut-off valve, leaks in your plumbing system, a failing pressure regulator, corroded pipes in older homes, or issues with the municipal water supply all contribute. Test the water pressure at different points in your home. If it is isolated to one fixture, the issue is usually a clogged aerator or failing fixture. If it affects your whole home, we check your main shut-off valve, test your pressure regulator, and inspect your pipes for leaks or blockages.

Most tank-style water heaters last between 8 and 12 years, depending on water quality, usage, and how well they've been maintained. If your water heater is in the age range, start planning for replacement, even if it is still working. Signs your water heater is nearing the end include inconsistent water temperature, rust-coloured water, strange noises like popping or rumbling caused by sediment buildup, visible corrosion or moisture around the base of the tank, or a sudden increase in your energy bills. My tip is to check the serial number on the manufacturer's label. The first few characters usually indicate the month and year it was made. If it is over 10 years old and you are starting to see any of these warning signs, contact us for an assessment.

Chemical drain cleaners work by creating a chemical reaction that generates heat to dissolve clogs. They are inexpensive and convenient, but they come with serious downsides. The chemicals are harsh enough to damage your pipes over time, especially if you have older pipes or PVC plumbing. They weaken pipe seals and cause leaks. They are also dangerous to handle and harmful to the environment. Most importantly, they only provide a temporary fix. They might clear a surface clog, but they don't address the underlying cause. Professional drain cleaning uses methods like mechanical augering (snaking) or HydroScrub jetting, a high-pressure water system that scours the inside of your pipes clean, removing buildup, grease, and tree roots. To prevent further pipe damage, skip the chemicals and call us. We'll clear it properly and check for any underlying issues that might be causing it to come back.

Trenchless sewer line repair is a modern method for repairing or replacing underground sewer lines without digging up your entire yard. Traditional sewer line repair requires excavating a trench from your home to the municipal sewer connection, which means tearing up your lawn, driveway, landscaping, and sometimes even sidewalks or trees. Trenchless methods use small access points to insert a liner or pull a new pipe through the existing damaged pipe. The repair is done underground with minimal digging. The benefits are significant: your property remains intact, the work is completed faster, often in a day rather than a week, there is less disruption to your daily life, and you don't have to pay to restore your landscaping afterward.

Schedule a video camera inspection first. We assess your sewer line and let you know if trenchless repair is a good option for your home. Feel free to ask us about our payment plans and financing options for larger plumbing projects.

We recommend scheduling professional plumbing maintenance at least once a year. Think of it like an annual checkup for your home's plumbing system. During a maintenance visit, we inspect your pipes, drains, fixtures, water heater, and other components for signs of wear, leaks, corrosion, or buildup. We catch small issues, a slow leak, a toilet starting to run, early signs of water heater failure, before they turn into expensive emergencies. If your home is older, you have hard water, or you've had plumbing issues in the past, you benefit from maintenance twice a year. Maintenance catches mineral buildup from hard water, worn shutoff valves, early corrosion, and water-heater sediment before they turn into weekend emergencies.