Here are the many facets we consider for a Langley water heater repair service appointment:
Types of Water Heaters We Repair
Although you already own a hot water heater, you may consider swapping it out for another version soon to better accommodate your lifestyle. Whether you have a classic tank-based system or a modern tankless water heater, they both serve the same purpose. However, they differ in terms of operation and your personal preferences.
For example, a tank-based unit heats gallons of water in advance and stows it away for later use when it’s ready to be doled out. But sometimes it takes longer to recharge as it takes time for the water tank to refill itself with cold water to be made stoking hot and heat it again to the proper temperature. Alternatively, a tankless unit has an endless supply of heated water as it provides it instantly. It can be more energy efficient and better for your eco-footprint.
Gas Water Heater
A gas-powered heating system is set aflame by a burning fire at its base, and it bursts hot air via a chimney sweep throughout the heater. The hot flush is transported through your water supply, and it readily flows out of your tap as you turn it to the red setting. As the hot water is discharged, cold water is redirected into the system to be ignited once more. If you’re not receiving hot water on demand, it can be due to a faulty mechanism that requires a Langley water heater repair service.
If you want something budget-friendly, gas units are less expensive to install with lower upfront costs, and it’s great that you don’t need to get anxious about power outages. However, gas units require routine maintenance, such as regular cleanings, to remove carbon debris and sediment build-up.
Electric Water Heater
An electric-powered heating system reshuffles cold fluid to the dip tub and kindles it using thermal energy. Through the heat-out pipe, fluid is stoked hot as it ripples through your drain lines into your faucets. Although electric units are more costly to install upfront, there's no need to concern yourself with the frequency of routine maintenance as they don’t need to be cleaned as often. They’re easier to repair and can save some bucks on your monthly utility bills, all while reducing your environmental impact.
One drawback is that you may need to be patient, as these units take some time to launch with heated water at the beginning but will generously supply once they do.
Types of Components We Can Replace during a Water Heater Repair: Langley
- Thermostat: This controls the temperature of water from your taps and is a temperature-activated switch. So, if the thermostat on the heater senses water temperature below the minimum threshold, it will re-energize the heating element and send a call-out for heat. Some telltale signs that your thermostat is malfunctioning include not receiving enough heated water or slow hot water recovery. Sometimes, it can have the opposite effect, and it can overheat the water, which can be dangerous. If your temperature levels are fluctuating, call our skilled plumber for water heater repair. Langley experts can mend the faulty thermostat or replace it with a new one.
- Tank flushing: It’s essential for homeowners to flush out their water heater tanks on a periodic basis. This ensures that sediment buildup and debris don’t settle at the bottom, as they can cause corrosion and other issues. You could experience rust-coloured water or rusty smells.
- Water heater leaks: Leaks by the tank’s drain valve indicate a clog caused by mineral deposits. Luckily, that’s a quick fix. However, if the leaks occur around the tank, you’ll need an expert plumber to inspect the issue.
