You don’t have to give up your shower thoughts, let alone the privilege of steaming hot water, because you think you’re at fault somehow. The truth is, you’re not. Some homeowners overlook the fact it has nothing to do with their bad habits of constantly craving hot showers, but that over time your unit becomes less effective from wear and tear due to faulty mechanisms like the pilot light being snuffed out or the heat pump being busted. And if you have a hot water tank, don’t be surprised to see sediment buildup and discoloured rust if you’ve never flushed the tank.
Some remain complacent and become indifferent to a water heater repair. Maple Ridge should not buy into fallacious thinking and assume their system is regenerating itself with hot liquid, explaining the long gaps between hot showers when it is slowly deteriorating. On average, hot water can last many years, around 10 to 12 for gas-powered versions and 15 to 20 for electric-powered versions. This of course all depends on your effort and motivation toward preventative maintenance, including routine inspection and professional cleanings done annually as part of your plumbing inspection and diagnosis. Some red flags that indicate your unit is about to go kaput include hairline cracks or fractures, leakages, random puddles around the tank, discoloured, cloudy or rusty water, and odd odours – all things you shouldn’t evade.
Our Miraculous Maple Ridge Water Heater Repair Services
These days hot water shouldn't be touted as a luxury given advanced technology and the wide range of affordable energy-efficient units out there. If you have been keen on proper upkeep and routine maintenance, there is a slim chance your unit won’t break anytime soon and last you for many years to come. But remember, your unit is not indestructible and will eventually reach its peak and require a Maple Ridge water heater repair. You’ll have a suspicion something is off-kilter as your unit won’t quite hold and churn our hot liquid as it used to, or it's barely dragging along because it takes forever for your tap to give you the hot stuff when you’re washing your hands. All things considered, a Maple Ridge water heater repair is a win-win solution and a worthwhile investment as you’ll save on your monthly utility bills and do a favour to the environment by being mindful of your eco-footprint–and best of all, you get endless and stoking hot water.
Our Authorized Maple Ridge Water Heater Repair Process
Here is what we take into consideration for a Maple Ridge water heater repair service appointment:
Types Of Water Heaters
You may already have a hot water tank, but it would be a good idea to be open to exploring the possibilities of upgrading to a different version or perhaps considering add-on features for your old one to better suit your daily lifestyle. Typically, you can go for the traditional tank-based system or a modern tankless water heater. Both have the same end goal but have different approaches to accommodate your personal needs. Tank-based units heat a bunch of fluid in advance and store it only to be used later. This version takes time to reboot and recharge, so fair warning there will be a short pause period in which it will recycle by refilling itself with cold water to be made hot once more. Tankless units provide an effortless and endless supply of hot water right from the get-go and will have no rest or pause period in between. Going tankless can be more energy efficient, and you probably won’t need much tankless water heater repair. Maple Ridge homeowners can choose from:
- Gas: A gas-powered heating system is enflamed with a fire at its base, which transmits hot air through a chimney sweep, and this heat transfer directly comes out of your tap. Although these units are cheaper to install upfront, you can expect more legwork required for routine maintenance, including regular flushing of carbon soot and sediment buildup and gas fitting inspection. If you think cleaning is a boring chore, then don’t be taken aback by discoloured rust that will eventually show up. If that’s the case, we recommend going for something more hands, such as an electric version.
- Electric: An electric heating system redirects the cold supply to the dip tube and ignites using thermal energy. This process takes place in the heat out pipe as the liquid is made burning hot and flushes through your drain lines directly into your tap. If you have some cash to spare, we recommend this version. Although it has a hefty price tag upfront, you don’t have to worry about maintenance and cleaning as this unit won't easily corrode. Plus, it doesn’t require as much water heater repair. Maple Ridge residents will save on their utility bills in the long run. The only thing to take into consideration is that electric versions sometimes take time to start up and launch, but once they do, they’ll provide you with a plentiful supply of hot water.
Types Of Water Heater Components
- Thermostat: This device controls the temperature of the water that flows through your taps; once it detects water temperatures below the predetermined level, it will regenerate the heating element by transiting a signal for more heat. Lately, if you’ve noticed you're not receiving enough hot water, let alone it takes forever for it to recover, it can be the thermostat is broken. If the temperature levels are fluctuating and not balanced during your water heater repair, Maple Ridge clients can ask their trained plumber to take another look.
- Heat Pump: This is not mandatory for your unit but works wonders for energy efficiency. If this device is attached to your unit, it will immediately allow it to become more productive. Once the heat pump is switched on, the source of heat within is moved around in every direction rendering the unit more effective in heating water. You’ll not only save on expenses for utility bills, but you’ll slim to none and have to wait for your unit to recharge plus, it serves as a backup in emergencies.
